cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1326
Views
0
Helpful
1
Replies
Highlighted
Beginner

Cellular CDMA Configuration feature cannot be discovered In CCP

Hi

I used ccp v 2.6 and i was trying to configure Cisco 819  3G router using it .But after discovering  the device it

Shows the following error message

Cellular CDMA Configuration feature cannot be discovered. This and associated features may not function correctly.

ROUTER DETAIL


sh version

Cisco IOS Software, C800 Software (C800-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Wed 21-Mar-12 01:19 by prod_rel_team

#sh flash:


-#- --length-- -----date/time------ path

1     31291784 Sep 25 2012 14:04:24 +00:00 c800-universalk9-mz.SPA.151-4.M4.bin

2         3331 Sep 25 2012 14:18:34 +00:00 cpconfig-8xx.cfg

3      2941440 Sep 25 2012 14:18:46 +00:00 cpexpress.tar

4         1038 Sep 25 2012 14:18:50 +00:00 home.shtml

5       115712 Sep 25 2012 14:18:56 +00:00 home.tar

6      1697952 Sep 25 2012 14:19:06 +00:00 securedesktop-ios-3.1.1.45-k9.pkg

7       415956 Sep 25 2012 14:19:12 +00:00 sslclient-win-1.1.4.176.pkg

223690752 bytes available (36483072 bytes used)

Regards

Charith

1 REPLY 1
Beginner

Cellular CDMA Configuration feature cannot be discovered In CCP

I Have the Same issue

System image file is "flash:c800-universalk9-mz.SPA.153-1.T.bin"

NAME: "C819HG+7-K9", DESCR: "C819HG+7-K9 chassis, Hw Serial#: FCZ1606C0BY, Hw Revision: 3.0"

PID: C819HG+7-K9       , VID: V01 , SN: Fzxxxxxxxxxxxxxxxxxxx

NAME: "C819H Mother board on Slot 0", DESCR: "C819H Mother board"

PID: C819HG+7-K9       , VID: V01 , SN: Fxxxxxxxxxx

NAME: "Modem 0 on Cellular0", DESCR: "Sierra Wireless Mini Card MC8705 HSPA+R7 modem"

PID: MC8705            , VID: 1.0, SN: 3xxxxxxxxxxxxxxxxx

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Cisco C819HG+7-K9 (revision 3.0) with 492620K/31667K bytes of memory.

Processor board ID FCZ1606C0BY

4 FastEthernet interfaces

1 Gigabit Ethernet interface

1 Serial(sync/async) interface

1 terminal line

1 Virtual Private Network (VPN) Module

1 Cellular interface

DRAM configuration is 32 bits wide

255K bytes of non-volatile configuration memory.

254464K bytes of ATA System CompactFlash (Read/Write)