Chose one of the inside network's ip address for use of "vrtual telnet"

[LIMTT]

Hey, I have a PIX 525 Ios 6.2

Can I use one of the inside network's Ip addres for the use of virual telnet ?

I had check the sample config from CCO.

Most of them are using the outside network's IP address.

If possible, provide me a sample.

Else pls point to the respective website for detail information.

Thanks for your help.

[kmarrero]

You can use an inside address for the virtual telnet but it must be linked to an outside interface. The following URL shows a good example. http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/tz.htm#xtocid8