CISCO NEXUS 5548 (5K) Login-Block command not found

[Frank27]

Hi,

I have a problem with a CISCO 5548 switch . I cannot find the login-block command.

System version: 7.0(2)N1(1)

In global configuration mode there is no login-block command, neither under system login block-for or in the aaa  subsystem menu.

As per example :

(config)# aaa authentication rejected 3 in 20 ban 300
                                                     ^
% Invalid command at '^' marker.

Followed these indications :

https://www.cisco.com/c/en/us/support/docs/csa/cisco-sa-nxos-login-blockfor-RwjGVEcu.html

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/security/configuration/guide/b-cisco-nexus-9000-nx-os-security-configuration-guide-93x/b-cisco-nexus-9000-nx-os-security-configuration-guide-93x_chapter_011.html

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/security/configuration/guide/b-cisco-nexus-9000-nx-os-security-configuration-guide-93x/b-cisco-nexus-9000-nx-os-security-configuration-guide-93x_chapter_011.html#task_794D196F...

I need to activate the login-block (QUIET MODE) for ssh.

Any idea regarding?

[balaji.bandi]

check is this may be a bug referencing to nexus 9K - but worth checking.

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvf86915

[Frank27]

Workaround: Replace "login block-for" and "login quiet-mode" with "system login block-for" and "system login quiet-mode", respectively. Use "show system login ..." for relevant show outputs.

Nothing, these commands are not implemented .