We have configured NAC in L3 OOB out of band mode where enforcement is defined at Remote Router end. We have defined Discovery IP address from CAS untrusted interface (note that we have not configured Policy base Routing scenario)but most of the time user try to connect to other CAS though its not there in Discovery Host. e.g. if Discovery IP is 172.16.16.100 then its logging in to 172.16.16.102 . Even Cisco TAC is also not able to find the root cause. Can any pne help me out in this?
Because Internet Explorer allows exporting of the CAS certificate, this section describes how to obtain the root certificate on a Windows system. Administrators can then transfer the certificate to their Mac via email as an attachment, FTP, or USB storage device.
There are three ways to retrieve the root certificate:
â¢Get the Root Certificate From the Mac OS X Agent Bundle
â¢Transfer the Root Certificate from Windows Using Internet Explorer
â¢Use Web Login to Get the Root Certificate
Get the Root Certificate From the Mac OS X Agent Bundle
Step 1 In the Finder, go to /Applications/CCAAgent.app.
Step 2 Ctrl-click on the CCAAgent.app to display the context menu.
Step 3 Choose Show Package Contents and search for the "perfigoca.crt" certificate in the /Contents/Resources/ folder.
Step 4 Drag and drop the "perfigoca.crt" certificate to the keychain.
i have an ip that is part of our internal network, i configured route map on the core to redirect the traffic to the firewall for further inspection.i checked the firewall logs i can see the traffic is redirect to the firewall successfully. i could ping o...
Hi, 1)May I know wht it means when context visibility Status showing 'disconnected" and '(blank)'?Difference between 'disconnected" and '(blank)'. Since both devices also not connected.I found tht these devices are no longer connected to the swi...
Hi ,I would like to configure multiple public ip (same subnet) on outside interface of ASA.I want to use static NAT for specific purpose.For example i have 8 public IP and I want to use 1 is internet ,1 for VPN ,1 for DMZ server and all ip want to a...
Hi all, Is it a way to retrieve the IPS policies from our IPS Appliance or censor? I have tried to look for a way but I am not able to do so. May I knwo any way can retrieve the policies from the Appliance either from the Appliance itself o...
Hello,I configured very easy the SSL in RV345 Vpn router, according this doc: https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5519-configure-secure-sockets-layer-virtual-private-network-ssl-v.htmlI tri...