Configuring ASA5510 with 2811 ISR

[femi.agboade]

Hello,

I have a 2811 ISR configured to provide the following services to my network:

• Internet access to LAN users
• Cisco Call Manager Express
• Site-to-stie VPN to 3rd party networks
• VPN server to provide VPN access to remote users
• Security Zone configurations
• Static NAT configurations

Now I recently just got the ASA5510 device and I am not sure how to go about with the setup, whether to put the ASA in between the internet and the ISR (Internet - ASA - ISR - LAN), or put the ISR in between the internet and the ASA (Internet - ISR - ASA - LAN)?

While i know I can move most of the config unto the ASA, i know that the CME cannot be moved, hence I would like to do the setup such that users on the network still have access to CME.

Suggestions please.

Regards,

Femi

[Leo Laohoo]

Duplicate posts.  

[femi.agboade]

Hi,

Sorry about that. Wasnt sure where to post the question. So any suggestion?

Regards,

Femi

[Tagir Temirgaliyev]

Hi

I will prefer  (Internet - ASA - ISR_CME - LAN)