Hell-o,
Can really really use your help and advise here. I just converted the few conduit commands to access-list commands. I used the Output Interpreter utility. Everything seems to be function correctly thus far, at least no user complaints.
My concern is this, the Output Interpreter is giving me the following error warning;
The following static statements do not appear to have a corresponding 'conduit' or 'access-list/access-group pair:
static (insdie,outside) 198.137.141.4 10.0.0.120 netmask 255.255.255.255 0 0
Consider configuring an access-list/access-group pair for these statics.
I tried creating another access group and list for the 198.137.141.4 (which is our secondary external dns) and ended it with 'in interface out' . When I try this the next access-group would just overwrite the last one in the config file. Any help here is greatly appreciated.
Here is the config file:
: Saved
: Written by enable_15 at 16:22:52.786 UTC Mon Oct 7 2002
PIX Version 6.2(1)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password LsICg6if8W8s6Uok encrypted
passwd mOXq4Sf2Q.V1AanB encrypted
hostname PIX100
domain-name testconfig.edu
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
access-list acl_outside permit tcp any host 198.137.141.1 eq www
access-list acl_outside permit tcp any host 198.137.141.1 eq domain
access-list acl_outside permit udp any host 198.137.141.1 eq domain
access-list acl_outside permit icmp any any
access-list acl_outside_sec permit udp any host 198.137.141.4 eq domain
access-list acl_outside_sec permit tcp any host 198.137.141.4 eq domain
pager lines 24
logging on
logging timestamp
logging trap warnings
logging host inside 10.0.0.160
interface ethernet0 100full
interface ethernet1 100full
mtu outside 1500
mtu inside 1500
ip address outside 198.137.141.5 255.255.255.0
ip address inside 10.0.0.10 255.0.0.0
ip audit info action alarm
ip audit attack action alarm
arp timeout 14400
global (outside) 1 198.137.141.250 netmask 255.255.255.0
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 198.137.141.1 10.0.0.125 netmask 255.255.255.255 0 0
static (inside,outside) 198.137.141.4 10.0.0.120 netmask 255.255.255.255 0 0
access-group acl_outside in interface outside
route outside 0.0.0.0 0.0.0.0 198.137.141.254 1
route inside 192.195.42.0 255.255.255.0 10.0.0.11 1
route outside 198.137.148.0 255.255.255.0 198.137.141.253 1
route outside 198.137.156.0 255.255.255.0 198.137.141.253 1
route outside 198.137.157.0 255.255.255.224 198.137.141.253 1
route outside 198.137.157.32 255.255.255.224 198.137.141.253 1
route outside 198.137.157.64 255.255.255.224 198.137.141.253 1
route outside 198.137.157.96 255.255.255.224 198.137.141.253 1
route outside 198.137.157.128 255.255.255.224 198.137.141.253 1
route outside 198.137.157.160 255.255.255.224 198.137.141.253 1
route outside 198.137.157.192 255.255.255.224 198.137.141.253 1
route inside 198.137.158.248 255.255.255.248 10.0.0.11 1
timeout xlate 1:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 10.0.0.160 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
tftp-server inside 10.0.0.160 inside
floodguard enable
no sysopt route dnat
telnet 10.0.0.0 255.0.0.0 inside
telnet timeout 60
ssh timeout 5
terminal width 80
Cryptochecksum:7b83753a9e73ca2393aebc97f85b8129
: end
