01-23-2003 01:59 PM - edited 03-09-2019 01:49 AM
hi me again. sorry for the newbieness of my questions:
in the following show route command results, i'm having problems figuring out if it's right. Info given to me by MCI,
default gateway: 54.54.54.190 changed for safety reasons
subnet mask : 255.255.255.192
outside interface = 54.54.54.129
inside interface = 172.16.10.1
interface3 = 172.16.20.1
interface4 = 172.16.40.1
interface5 = 172.16.50.1
i want the default gateway i'm assuming to be 54.54.54.129
here's the results, and is this right? for some reason the second line doesn't look right for outside....
PIX515URINTEL01(config)# show route
outside 0.0.0.0 0.0.0.0 63.123.35.190 0 OTHER static
outside 63.123.35.128 255.255.255.192 63.123.35.129 1 CONNECT static
inside 172.16.10.0 255.255.255.0 172.16.10.1 1 CONNECT static
global01 172.16.20.0 255.255.255.0 172.16.20.1 1 CONNECT static
surveys01 172.16.40.0 255.255.255.0 172.16.40.1 1 CONNECT static
vpn01 172.16.50.0 255.255.255.0 172.16.50.1 1 CONNECT static
01-23-2003 02:42 PM
It looks fine
outside 0.0.0.0 0.0.0.0 63.123.35.190 0 OTHER static
This line is telling you the default route of the Pix - .190 as per the MCI information.
outside 63.123.35.128 255.255.255.192 63.123.35.129 1 CONNECT static
This line is telling you the details of the connected IP network on the outside interface - .129 being the outside interface's IP address and that this interface is the exit to get to that network.
HTH
Kev
01-23-2003 03:10 PM
Kev,
Thanks for the input.
One more question. Does the 0 hops in the first line need to be 1?
01-23-2003 03:17 PM
Yes, thats correct - it should indeed be 1
Kev
01-23-2003 02:45 PM
It is correct. The default gateway should be the .190 address and the line :
outside 63.123.35.128 255.255.255.192 63.123.35.129 1 CONNECT static
is just saying that the 63.123.35.128 255.255.255.192 is directly connected to the outside interface of you PIX.
Kevin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide