DHCP on NAS for trusted side

[boris.senker]

Is it possible to configure NAS (on NAM perhaps) to assign IP addresses to clients on the trusted side - i. e. to act as a DHCP server for the trusted side subnets or change the address through the NAC Agent after the posture assessment is over?

[Faisal Sehbai]

Boris,

I'm assuming from the question that this is an OOB setup. If so, the agent requests a new IP if you're using Role-Based VLANs with VGW. In OOB RIP setups, it will also request a new IP when it gets on the final VLAN.

CAS giving out IP addresses on the trusted subnets would not be possible, or even a good idea!

HTH,

Faisal

[boris.senker]

Faisal,

Your assumption was correct, this is an OOB setup. Your reply confirmed what I suspected already.

Thank you for your help.