Dumb L2 only switch hanging off of L3OOB managed switch
I have an issue where I have a dumb layer2 switch (netgear and Linksys) hanging off of a 3550. Devices on these ports loop during the authentication process, or don't even go through it, the simple get left in the AUTH VLAN. I do not have any port security setting turned on on these ports, and have all of the IP Phones and Printers in the filtered devices list. Any ideas why this may occur?
Re: Dumb L2 only switch hanging off of L3OOB managed switch
Is it that you only have IP phones and the printers that are in the filtered list on that unmanaged switch? If that is the case this should work fine.
If you have PCs as well that are controlled by NAC then it will cause the port on the 3550 to go into the unauthenticated VLAN where it will authenticate and then switch to the access VLAN. If you have more than one PC connected then it will cause a MAC Notification to be sent to the NAS causing the port to go into the unauthenticated VLAN once again.
Do you have the "remove other out-of-band online users on the switch port when a new user is detected on the same port" enabled? (OOB Management --> Profiles --> Port --> Your switch profile). If you do, uncheck it and try again.
Posting this for anyone interested in using a Raspberry PI as a flow collector for Stealthwatch. We created a very lightweight version of our software. It can create flows if the eth port is attached to a SPAN or you can forward NetFlow/IPFIX ...
Dear Team Suppose we have hundreds of rules in access policy on cisco fmc device. Now I want to fetch all access policy rules in which I have mentioned some specific port number X. Can anyone help me with the process to fetch the same?
Greetings everyone, Happy New Year! I would like to thank you all for making our ISE demos in dCloud a great success!
The ISE instant demo has been in the top 5 of Enterprise demos for a long time now and recently just moved into the #1 and 2 slots...
User Experience Enhancements
As part of the Cisco Common User Experience program, we are working towards a more uniform user experience and terminology alignment. This program runs across all Cisco security products.
A More Intuitive Cognitiv...