Hi
I am trying out EzVPN with split dns.
On the IOS EzVPN server, the split-dns is "test.com"
crypto isakmp client configuration group mine
key cisco
dns 10.20.30.40
pool mine
split-dns test.com
split-dns www.win2003.com
I have connected IOS router as a client and brought up the tunnel with network extension mode.
Now, if I try to ping www.test.com from the EzVPN client (IOS router), it sends the DNS request to the internet DNS server (configured with "ip name-server").
But actually, it should have sent the DNS request to "10.20.30.40", the DNS server that was sent by the EzVPN server right?
Also I also don't see the split dns list in "sh crypto ipsec client ezvpn":
client#sh crypto ipsec client ezvpn
Easy VPN Remote Phase: 8
Tunnel name : mine
Inside interface list: Loopback0
Outside interface: FastEthernet0/0
Current State: IPSEC_ACTIVE
Last Event: MTU_CHANGED
DNS Primary: 10.20.30.40
Save Password: Disallowed
Current EzVPN Peer: 172.16.32.43
Sorry, I can't share my configuration. But this is straight forward.
Please share your inputs.
I am adding some more observations.
show ip dns view O/P doesn't have "DNS View ezvpn-internal-view parameters"
show ip dns view-list doesn't have "View-list ezvpn-internal-viewlist"
With regards
Kings