Having an issue with vpn load balancing certificate on the vip
I am setting up vpn load balancing in a lab. I have two asa's running 8.6. I created a ucc cert from our internal CA that has the vip as the CN in the cert and the two ASA's themselves as subject alternative names. I used open ssl to create the request. In each asa I am using encryption between the ASA's to encrypt the psk's. Since this is a lab and I do not have the DNS servers at my disposal I've added the hostnames and addresses of each ASA to the config in the ASA's. The problem I have is that when I connect to the vip I get a cert error saying the cert doesn't match the name on the site. See below:
"The security certificate presented by this website was issued for a different website's address."
I have a hostfile on my lab pc connected directly to the outside of the ASA that can resolve the name of the vip but when I browse to the vip I get the cert error. If I click proceed anyway the asa redirects me and the page opens without error on one of the two ASA's.
Does any one know what the CN of the cert should be for vpn load balancing. I thought the CN would be the vip but sometinhg is not right.
Threat Response Basics
What is Threat Response and how can it help my organization?
What is the cost of Threat Response?
What are the deployment options for Threat Response?
Is Threat Response available outside of the United States?
Gartner has once again named Cisco a Leader in the Magic Quadrant for Network Firewalls. This distinction recognizes Cisco's ingenuity in redefining the firewall as the basis for an integrated security platform.
Find out how Cisco stands out from the comp...
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...