cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
883
Views
0
Helpful
2
Replies
Highlighted
Beginner

Help me! Problem with Pix 501

I'm using Pix 501 with firmware: Version 6.3(3)

I have problem with Pix 501:

+ transfer rate data between interface outside and inside very slow, even between 2 interface inside.

+ I have test file transfer between 2 PC connect via interface inside.

+ Results transfer 1 file 1MB with total time 60s

I don't upgrade software current from 6.3(3) to 6.3(5) via TFTP. It's error Please see attach file

Please help me to solve this problem.

Thanks for support.

Everyone's tags (4)
2 REPLIES 2
Beginner

Help me! Problem with Pix 501

Hello Minh Nguyen Viet,

Thank you for your question.

However, the Small Business Support Community is limited to Cisco Small Business Products and the PIX501 is considered as an Enterprise class device.

In the next link you will find the area that may help you further with your question.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/

Best regards,

Diego Rodriguez

Cisco Small Business Community Engineer.

Rising star

Help me! Problem with Pix 501

Hi Minh,

I have moved your question into the correct area within the Cisco Support Communities.

Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

Regards, Cindy If my response answered your question, please mark the response as answered. Thank you!