Im running a lab combined with production test where we have desktop device traffic travelling over a pix to pix ipsec tunnel, itself which is tunnelled over a pix to pix ipsec tunnel, transiting over a provided MPLS segment (the MPLS which i have no vision of). There are issues with packet MTU, with all the kit at default 1500 mtu, pings drop at 1375 bytes. Forcing a lower MTU of 800, and the pings start droping at 661 bytes. Needless to say the desktop applications have issues... Before I start to look at changing DF bits/TCP MSS, I am wondering if anyone has worked this scenario previously, and found a resolve ??
How can I get early access to beta features?
You can apply to join the Cisco Security Beta Program at this link:http://cs.co/security-beta-nominationParticipants receive early access to new features and direct lines to engineering, in e...
In dCloud we have the ISE Sandbox. It is provided as a quick opportunity on the new OS with minimal support. It comes with no documentation. The following document can be used with the Sandbox or the Secure Access Wizard as a basic flow and validation of ...
Portal Flow Overview:
Imagine you wanted to combine a Sponsored Guest and Hotspot portal from a single landing page - this document shows you how to achieve a portal flow as shown below:
ISE offers various types of guest por...