Is CSPM 2.3.3i multi-threaded?

[jballay]

Is CSPM 2.3.3i multi-threaded? Would overall performance, when using the event viewer, increase if dual processors were used? Right now our box has a PIII-866 with 512 RAM and processor utilization jumps to 100% for about 3 to 5 minutes when you try to open event viewer and look at 3 or 4 days of events that total about 30k-40k.

Could I be missing some configuration tweaks or neglecting necessary database maintenance?

Thanks in advance for your replies.

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

[rcrowe]

i have CSPM running on a dual processor machine and when i open up events and look at the processor util i see that cpm is using both processors.