08-15-2002 09:13 PM - edited 03-08-2019 11:57 PM
I would like that all packet that have destination adresse "15.x.x.x " be nated in "10.x.x.x ". does cisco ios support this option ? I don't want to use static nat because I have to many adress to translate. my goal is to nat only the first digit of the destination ip adress. Can I do this with cisco router 1721 ?
thank a lot in advance
08-16-2002 12:31 PM
i dont think so.
at least you use the /8 source with the /8 pool.
08-22-2002 08:45 AM
Try this
ip nat pool TEST 10.x.x.1 10.x.x.x netmask 255.255.255.0
ip nat inside source list 101 pool test
access-list 101 permit ip any 15.0.0.0 0.255.255.255
Apply following in the right interfaces
ip nat inside
ip nat outside
Vikas
08-23-2002 06:10 AM
You can do this with a Pix, not sure about a 1721. To do it on a Pix use the following command:
static (inside, outside) 10.0.0.0 15.0.0.0 netmask 255.0.0.0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide