We are installing an ISA 3000 firewall in an industrial application, we install the ASDM-IDM launcher successfully, login to the FW and then it was shut down. After a week we apply power but we can't login and connecting a terminal it shows:
Some boot messages... then
Starting udev
Configuring network interfaces... done.
Populating dev cache
fsck.fat 3.0.28 (2015-05-16)
0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
Automatically removing dirty bit.
Starting check/repair pass.
Starting verification pass.
Performing changes.
/dev/sdb1: 51 files, 416365/1931168 clusters
dosfsck(/dev/sdb1) returned 1
Mounting /dev/sdb1
Starting random number generator daemon.
Running postinst /etc/rpm-postinsts/100-rng-tools...
Running poIO Memory Nodes: 1
IO Memory Per Node: 499122176 bytes num_pages = 121856 page_size = 4096
Global Reserve Memory Per Node: 314572800 bytes Nodes=1
LCMB: got 499122176 bytes on numa-id=0, phys=0x1f0400000, virt=0x7fd2a8c00000
LCMB: HEAP-CACHE POOL got 312475648 bytes on numa-id=0, virt=0x7fd296000000
total_reserved_mem = 499122176
total_heapcache_mem = 312475648
total mem 3961584791 system 8339234816 kernel 25551360 image 98996048
new 302870
The boot process stops here without any other messages; any restart or "Reset to factory default" give the same result: the File System is damaged.
The question is, of course: it is possible to repair the file system?
Thanks in advance for any suggestion.
Paolo Prina
