lost multicast config

[anderson-david]

we have a PIX515E with 6.2.2 the problem is that when we config the firewall to forward multicasts all is ok but if we power the pix off then on, even though the multicast commands are still in the config it will not fwd multicasts until commands are reentered

anyone have any ideas

dave

[umedryk]

Hi Dave,

Double check if you have entered all the commands. They are listed in this Link:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/config/bafwcfg.htm#xtocid26>