cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

147
Views
0
Helpful
4
Replies
Beginner

Microsoft Netmeeting and PIX 501

I have a SOHO with a PIX 501. I have a cable modem that plugs into the outside interface of the PIX.I would like to allow Microsoft Netmeetings. What is the proper congig? I'm running ver 6.3.1.

Thanks,

4 REPLIES 4
Cisco Employee

Re: Microsoft Netmeeting and PIX 501

Hi,

Do you mean netmeeting from outside to inside?

Based on this link

http://support.microsoft.com/default.aspx?scid=http://support.microsoft.com:80/support/kb/articles/Q158/6/23.asp&NoWebContent=1

these are the ports you need to open and also need static translation for.

e.g. if you want to connect to a PC from outside to inside

static (inside,outside) tcp interface 389 192.168.1.1 389

You need smiliar static for all the ports that netmeeting will be using.

Then

YOu need access-list to allow the traffic

access-list 100 permit tcp any host eq 389

Thanks

Nadeem

Highlighted
Beginner

Re: Microsoft Netmeeting and PIX 501

Thanks Nadeem for replying.

I only need to allow people to connect to my SOHO PC.

The user I'm testing with is coming from behind a PIX 515 running ver 5.3.(4). I don't receive any video. I added the following line to my config:

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

static (inside,outside) x.x.x.x y.y.y.y

access-list acl-out permit tcp any host x.x.x.x eq 522

access-list acl-out permit tcp any host x.x.x.x eq ldap

access-list acl-out permit tcp any host x.x.x.x eq 1503

access-list acl-out permit tcp any host x.x.x.x eq h323

access-list acl-out permit tcp any host x.x.x.x eq 1731

Does the user behind the 515 need to add any lines to his PIX 515?

Thanks

Cisco Employee

Re: Microsoft Netmeeting and PIX 501

HI,

it is not necessary to add these commands on the other pix, provided fixup are intelligently picking up dynamic ports. but to start with you may try adding the similiar commands in both the pix

Beginner

Re: Microsoft Netmeeting and PIX 501

Thanks.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here