03-07-2011 09:38 PM - edited 02-21-2020 04:16 AM
Are NAC role-based vlans on WLANs possible?
Solved! Go to Solution.
03-25-2011 05:30 AM
Hi,
This is not possible yet.
This limitation is documented on the NAC Config Guide on the Wireless OOB section:
•Authentication and Access VLANs are defined on the WLC and changes between the two are transmitted to the CAM using SNMP traps—administrators do not assign VLANs from the CAM via user role assignments or otherwise.
I hope this helps.
Regards,
Federico
--
If this answers your question please mark the question as "answered" and rate it, so other users can easily find it.
03-25-2011 05:30 AM
Hi,
This is not possible yet.
This limitation is documented on the NAC Config Guide on the Wireless OOB section:
•Authentication and Access VLANs are defined on the WLC and changes between the two are transmitted to the CAM using SNMP traps—administrators do not assign VLANs from the CAM via user role assignments or otherwise.
I hope this helps.
Regards,
Federico
--
If this answers your question please mark the question as "answered" and rate it, so other users can easily find it.
03-30-2011 12:29 AM
thanks for sharing this information Fed. high 5 .
Regards,
Vinay
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: