PGM configuration on 2911

[Victor Rodriguez Gonzalez]

HI,

I try to configure PGM in my 2911 plattform but it was impossible.

I tried with many 15.1 version that support this protocol.

Someone configured PGM over 2911 Routers? What does correct IOS for work?

Regards!

[Victor Rodriguez Gonzalez]

Could it be License Problem???

Software Version

c2900-universalk9-mz.SPA.151-4.M.bin"

License Info:

License UDI:

-------------------------------------------------

Device# PID SN

-------------------------------------------------

*0 CISCO2911/K9 FHK1447F2TT

Technology Package License Information for Module:'c2900'

----------------------------------------------------------------

Technology Technology-package Technology-package

Current Type Next reboot

-----------------------------------------------------------------

ipbase ipbasek9 Permanent ipbasek9

security None None None

uc None None None

data None None None

Configuration register is 0x2102

[raga.fusionet · Accepted solution]

Hi Victor,

This feature is not available on the IP Base feature set. You would need to upgrade your license to either Security or Data.

If you have CCO Access go to the feature navigator and check the "Search by Image" option. You need to just input your image name and you'll see the available features per feature set.

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

I hope this helps.

Raga

[Victor Rodriguez Gonzalez]

I configured few hours ago this feautre before your answer, and it worked fine with Evaluation Data license.

Thanks a lot for your help!

[raga.fusionet]

Great to hear that! Have  good one