07-11-2003 01:53 AM - edited 03-09-2019 03:59 AM
I have a broadband adsl connection with no fixed IP address provided.
How should I configure on my PIX firewall especially on the outside interface as how to put in my username and password for aunthentication.
07-11-2003 06:58 AM
Purchase yourself cheap dsl/cable modem with ethernet port...connect up pix to it..yu might need to arm yourself with a crossover cable if normal one don't bring up link.
Put all your ISP stuff on the modem.
cheers
Steve
07-13-2003 07:14 AM
How about the user authentication to the ISP.Where should I put it?
IS it under the PPoE option?and how about the NAT since I don't have any fx IP
07-14-2003 02:14 AM
Put your user authentication onto the cable modem and either apply NAt there (not many don't) if that device supports it or onto the PIX when you configure it thru the PDM.
cheers
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide