I try to set port range for NAT interface overload mapping on Cisco 2921 router running IOS version 15.5. It doesn't seem to have feature to set it up. Does anyone know other ways? Should I upgrade the IOS to see new IOS will support port range set up?
Try something like (this example is for two different servers):
POOL1 is the first internal server and ports 100 to 300 are NATed through. POOL2 is a second server and ports 500 to 1000 are NATed through.
ip nat pool POOL1 192.168.1.1 192.168.1.1 netmask 255.255.255.0 type rotary ip nat pool POOL2 192.168.1.2 192.168.1.2 netmask 255.255.255.0 type rotary ip nat inside destination list 101 pool POOL1 ip nat inside destination list 102 pool POOL2 access-list 101 permit tcp any any range 100 300 access-list 102 permit tcp any any range 500 1000
ISE 2.7 Guest Access Management Features
The following document explains the guest features of ISE 2.7. For more detail of what ISE 2.7 has to offer please check the associated documentation.
Auto Login on Sponsor Approval
SymptomsOutage during FTD code upgrade DiagnosisThe FTD code upgrade thru FMC will cause the traffic interruptionSolutionBelow process will upgrade the FTD with no downtime and no traffic interruption.Before the upgrade process:Download the FTD platf...
Process for FTD migration with PolicyAs per Cisco documentation, we have below steps for for de-register and register process. Please follow below steps :Step 1 : Break HA pair and de-register your FTD from FMC (old).Step 2 : Register your primary FTD wit...
Hi There,Is there a relationship between the hardware of the Cisco ASA 5505 FWs (V02) and the 9.x software version? Multiple ASA have been successfully updated with the same software. The ASAs that have been updated without any problems are V06 versi...
Dear Cisco Customers and Partners,
We know that the Cisco Identity Services Engine (ISE) is a critical element of your network security and so stability is of paramount importance. As a result, many of you asked us for a suggested release given sev...