10-25-2002 02:46 AM - edited 03-09-2019 12:49 AM
I actually have a Cisco 7200 series router for VPN tests.
I want to start with IOS 12.2(t) and a SA-VAM. The SA-VAM is not recognized by the router (Please have a look at the log). How can help.
....
IOS (tm) 7200 Software (C7200-IK9O3S-M), Version 12.2(8)T5, RELEASE SOFTWARE (f
c1)
.....
cisco 7204VXR (NPE225) processor (revision A) with 114688K/16384K bytes of memory.
Processor board ID 28341357
R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
4 slot VXR midplane, Version 2.6
.....
00:00:05: %PA-2-UNDEFPA: Undefined Port Adaptor type 650 in bay 1
00:00:05: %PA-3-DEACTIVATED: port adapter in bay [1] powered off.
10-25-2002 09:03 PM
There is no code on 12.2T line that supports the VAM yet.
You would have to use 12.1.9E and higher in the 12.1E line code.
Regards,
10-27-2002 11:07 AM
First of all, thank you for the information.
Is is response valid also for other routers like the 7100 series router?
Background: My company is a retailer with 600 store in Europe. We running actually a succesful test with 11 stores connected via Internet VPNs with our companies backbone. We want to migrate 200 stores next spring. Now we are looking for a VPN platform capable to run up 1000 tunnels and app. 30 Mbit/s and more 3DES throughput. The 12.2T high availability features and reverse route injection are a must.
Regards
10-28-2002 05:08 PM
It is basically for VAM. Support for 12.2T line is not yet out. So whichever router, the same applies for now. I suggest you contact you local marketing contact to push for release.
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide