cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
697
Views
0
Helpful
0
Replies
DaeHeon Kang
Beginner

Question of WAN MACSec

Hi

I am testing WAN MACSec, but it doesn't seem working properly as the below capturing from routers.

Is there any idea with this problem?

 

WAN MACSec.JPG

 

> Used the WAN MACSec configuration 

key chain k1 macsec
key 01
cryptographic-algorithm aes-128-cmac
key-string 12345678901234567890123456789012

 

interface GigabitEthernet0/0/0
mka pre-shared-key key-chain k1
macsec

 

> Show command output

DR-Router#show mka sessions

Total MKA Sessions....... 1
Secured Sessions... 0
Pending Sessions... 1

====================================================================================================
Interface Local-TxSCI Policy-Name Inherited Key-Server
Port-ID Peer-RxSCI MACsec-Peers Status CKN
====================================================================================================
Gi0/0/0 c4b3.6a06.8820/0008 *DEFAULT POLICY* NO YES
8 c4b3.6a06.8820/0000 0 Init 0100000000000000000000000000000000000000000000000000000000000000

 

DR-Router#show macsec summary

MACsec Capable Interface Extension Installed Rx SC
--------------------------------------------------------------------------
GigabitEthernet0/0/0 One tag-in-clear
GigabitEthernet0/0/1 One tag-in-clear
GigabitEthernet0/0/2 One tag-in-clear
GigabitEthernet0 One tag-in-clear

MACsec Enabled Interface Receive SC VLAN
-----------------------------------------------------
GigabitEthernet0/0/0 : 0 0

 

 

0 REPLIES 0
Content for Community-Ad