cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
211
Views
0
Helpful
3
Replies

"One or More Modules Reporting an Error"

Hi,

Please give suggestion on this error "One or More Modules Reporting an Error" message.

Snapshot is attached for refrence.

Thanks,

Abuzar

3 REPLIES 3
Rising star

Re: "One or More Modules Reporting an Error"

Abuzar,

Check here for config help:

http://www.cisco.com/en/US/docs/security/nac/profiler/configuration_guide/311/p_cfgpcol31.html#wp1094166

HTH,

Faisal

--

If you find this post helpful, please rate so others can find the answer easily

Highlighted
Cisco Employee

Re: "One or More Modules Reporting an Error"

Abuzar,

     With the netwatch module, if you do not have an interface configured or there is no traffic being seen on the configured interface the module will display this error message.   This error can be ignored if you have not yet configured the module and is normal for an unconfigured module.

     To correctly configure the module configure a spare interface on your collector with an ip address and either span traffic to that interface or configure a DHCP helper to forward DHCP traffic to that interface.

--Jesse

Re: "One or More Modules Reporting an Error"

Thanx for the valuable in formation Jesse.

-Abuzar