cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
479
Views
0
Helpful
2
Replies

remote access vpn

maktala007
Level 1
Level 1

Hi,

when i am trying to connect remotely from different laptops to pix, using vpn client software, able to get connections for all clients and the clients are getting different ip addresses from the pool mentioned in the pix configuration. But, all clients are getting the same mac address. is there any solution for this issue, so that the remote clients get different mac addresses like they are getting different ip addresses

2 Replies 2

ccbootcamp
Level 7
Level 7

What do you mean your clients are getting the same MAC address?!?!?! The MAC address should be set on your PC, not dished out by the PIX.

-brad

www.ccbootcamp.com

(please rate the post if this helps!)

I mean when i run "ipconfig /all" on the systems which are connected through the remote access vpn, they displaying e.g.

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Cisco Systems VPN Adapter

Physical Address. . . . . . . . . : 00-05-9A-3C-78-00

Dhcp Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.168.10

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . :

All systems are getting different ip addresses but same physical address.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: