06-02-2018 02:49 AM - edited 02-20-2020 09:45 PM
My RV110w running firmware 1.2.17,
Firmware MD5 checksum: | e1bdf15d4e60d062f7ecb3e92890ab3a |
now suddenly stops providing a DHCP address and the Internet link fails to remain at 100/full.
However if I have theRv110w log open it never fails. This is highly suspicious. Is anyone aware of this issue?
I know the rv110w is hacked because when a user is logged inot the system you get a message something like continue to log in instead of the username and password screen. I have a short timeout period of 5 minutes.
The lockup condition is something I don't know how it would be simulated. Symptoms
- Fix link speed changes
-disconnects from the Internet for short period about 15-20 seconds
-responds to ping but https management. I have only https configured.
16-June-2018- Rv110w reset for no reason.
06-02-2018 05:53 PM
I would like to add that the rv110 can not be accessed via management ip via https or http. I must reboot the router to regain access.
06-11-2018 10:55 PM - edited 07-06-2018 05:43 AM
today 12-June-2018 my RV110w disconnected from the WAN and did not provide a DHCP address. I was connected via ethernet cable and no other devices where connected. I could not access the management IP of the router.
July-2018 The failure of the rv110w occurs when using openvpn. I use Openvpn from Protonvpn and use the clients from tunnelblick and Protonvpn app.
Can anoyone suggest a condition that would prevent DHCP from workng on a rv110w?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide