S49 signature update For IDS 4.01 S37

[tcavdar]

We have IDS 4210 and version 4.01 S37 and updates IDS-sig-4.0-2-S46 ,IDS-sig-4.0-2-S47 are installed.Can i install S49 update to my IDS?

[marcabal · Accepted solution]

S49 can only be applied to 4.1(1) sensors so you must first upgrade to 4.1(1) with the following package:

IDS-K9-min-4.1-1-S47.rpm.pkg

THen you can install the S49 Signature Update:

IDS-sig-4.1-1-S49.rpm.pkg

Both are available at:

http://www.cisco.com/cgi-bin/tablebuild.pl/ids4

The problem you are going to have is that the 4.1(1) upgrade package requires that the memmory in your IDS-4210 be increased.

If you have a SmartNET contract on your IDS-4210 then you can use Cisco's Product Upgrade Tool to order the memmory upgrade at no additional charge.

The 4.1(1) upgrade can not be loaded on an IDS-4210 without the memmory upgrade. So you can't load S49 without the memmory upgrade.