I am try to use site to site VPN through VPN concentrator 3030 at both side. Site A has a lan Ip address 192.168.1.x/24 and my side IP address is 172.16.1.x/24. Now when source packet from 192.168.1.x subnet come to my VPN, I want to NAT it to 192.168.100.x before transfering to my LAN.IS it possible to do destination NAT at my site.
Re: Site to Site VPN NAT through VPn Concentrator..
Not at your site, or at least not with the VPN concentrator (you could NAT the traffic with any internal router on your site though). If you want the VPN3000's to do the whole thing then you have to NAT it at the SiteA concentrator, this way when it gets to your site it'll already be 192.168.100.x, which is really no different than the SiteB concentrator NAT'ing it after it arrives.
Earlier this year, we released Cisco Identity Services Engine (ISE) 2.6. It delivered a broad new set of features and greater scale - a big stride for both better NAC services that ISE delivers and better Software-Defined Access. Today, we’re thril...
Integrating Cisco Identity Services Engine with Cisco Meraki Systems Manager
Technical Marketing Engineer, Cisco Systems, Inc.
Cisco Meraki Systems Manager is a cloud base endpoint management solu...
Existing customers may download the Cisco Identity Services Engine (ISE) 2.7 which was released on November 18, 2019. For 90-day evaluations of ISE, please see How to Get ISE Evaluation Software & Licenses.
ISE 2.7 Guest Access Management Features
The following document explains the guest features of ISE 2.7. For more detail of what ISE 2.7 has to offer please check the associated documentation.
Auto Login on Sponsor Approval
SymptomsOutage during FTD code upgrade DiagnosisThe FTD code upgrade thru FMC will cause the traffic interruptionSolutionBelow process will upgrade the FTD with no downtime and no traffic interruption.Before the upgrade process:Download the FTD platf...