I have some ISR G2 routers and we noticed most of them are trying to connect to Trendmicro servers, I find this weird as there is no content filter configuration on the devices at all
I took one in my lab and when I first checked trm config status was "standby" after issuing trm register I see the router trying to connect every minute to a server, how do I stop this connections attempts? I dot want the routers to connect to Trendmicro
Again I see this in different ISR G2 models and different IOS versions (15.X and 12.X) so no bug there
BO1-RTR-2951#sh ip trm config
Server: trps.trendmicro.com ( Default *)
HTTPS Port: 443
HTTP Port: 80
Status: Active -> was standby
TRM Detailed debugging is on
Jan 11 21:58:23.368: TRM: Sending Registration Request to TRPS
Jan 11 21:58:32.368: TRM: Could not send reg post req - Host name resolution failed
Jan 11 21:59:32.368: TRM: Sending Registration Request to TRPS
Jan 11 21:59:41.368: TRM: Could not send reg post req - Host name resolution failed
Jan 11 22:00:41.368: TRM: Sending Registration Request to TRPS
Jan 11 22:00:50.368: TRM: Could not send reg post req - Host name resolution failed
Jan 11 22:01:50.368: TRM: Sending Registration Request to TRPS
Jan 11 22:01:59.368: TRM: Could not send reg post req - Host name resolution failed
Hello! I run 22.214.171.124.When I click download updates in ASDM I get:Download updates failed: Peer certificate cannot be authenticated with known CA certificates I have 3 identical devices and all of them have the same problem.. How can I fix ...
You would like to use the ASA Firewall Umbrella Connector to enforce DNS policy with Umbrella. However you would also like to exclude certain IP addresses or subnets from using this policy. I recently had the need to do this, had a bit of tro...
Hi Everyonem Just wondering if anyone knows why I am getting an error that says "Cryptographic algorithms required by the secure gateway do not match those supported by AnyConnect. Please contact your network administrator.". See attached...
The Cisco 2020 CISO Benchmark Report provides valuable takeaways and data on the most pressing topics: the impact of vendor consolidation, cybersecurity fatigue, outsourcing, top causes of downtime, the most impactful threats, and more. The repo...
Hi, Has anyone run into the "Channel down" issue when updating the identity certificate on the Stealthwatch SMCv and SFCv. I'm doing a POC for a client and every time I go an update the identity cert the SMC says "it could save the configuration" and...