cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
347
Views
0
Helpful
1
Replies
Highlighted
Beginner

VPN Design

I am in the position of design a VPN network which include fifteen sites the main site all the fifteen sites will communicate with each other via the main site. I want to be very clear about this. The Cisco products I will deploy at each of the fifteen sites are listed below:

The 1602r for dial up network at each sites incase of the main router fails.

15 1602r with

IP/FW featurePack CD16-CH-12.1.1=

IP PLUS IPSEC 56 FEATURE PACK CD16-CL-12.1.1=

IP/FW PLUS IPSEC 56 FEATURE PACK CD16-CHL-12.1.1=

WITH 2 FLASH MEMORY AS EXTRA EACH.

This is going to be the main router at each sites with its feature

15 1720

CD17-CHK2-12.1.1=

WITH 15 VPN DAUGHTER CARD INCLUDE THE SOFTWARE, MEMORY UPGRADE AND VPN MODULE.

OR

2621

CD26-CHK2-12.07=

WITH 2 WAN INTERFACE CARDS EACH

And the below for the main site with two 7120 for network resillience and redundant .

2 7120

CD71-CHK2-12.0XE=

CISCO7120-4T1

1 WAN INTERFACE CARD EACH.

Please could you advice on the best solution to this.

I believed I'd made right selections for the equipments

Simi

1 REPLY 1
Beginner

Re: VPN Design

After reviewing what you have done, it looks good to me. As a standard practice we call on our Cisco rep to come in to verify the setup. This way we are sure everything will work properly.