I need sample config for Multi site to site VPN with PIX version 6.2
Site to site with both side PIX is working ok, I need to add another tunnel to the PIX....
( Cisco site has ASA or PIX 7.0 config which is bit different than for PIX 6.2 )
Configuring PIX-to-PIX-to-PIX IPSec (Hub and Spoke)
Configuring PIX to PIX to PIX IPSec Fully Meshed
I need sample config for
"CONFIGURING DYNAMIC MULTIPOINT VPN SPOKE PIX IN FULL MESH IPSEC VPN"
it should be PIX 6.2 only