05-14-2002 12:40 PM - edited 03-08-2019 10:37 PM
I have a Cisco 3000 VPN box with 3 SEP200 U cards. Running latest software.
When I Telnet into console, the system goes to 100% utilization as indicated by blue front panel lights, and freezes. Have to power cycle to re-set box. Anyone else experience this or know of problem??
05-15-2002 06:38 AM
We were experiencing the same bahavior with our Cisco/Altiga concentrator.
I say "were", because we were provided a debug version of the software, and have not seen the "hang" behavior since making the software active in the concentrator.
We were given V3.5.2.int_2. This was provided to allow for further problem determination when the concentrator hangs, but it seems to run ok with this version.
05-16-2002 07:18 AM
Never mind. Our 3030 hung up on us last night. I'll update once I get something useful from Tech Support.
09-24-2002 08:11 AM
It appears the issue has been resolved. We are now running V3.6 without issue.
09-25-2002 10:01 PM
Mike,
If you don`t mind , would you share what caused the freeze problem and what version did you use ? Does Cisco have a bug ID on your case ?
Regards,
Engel
10-01-2002 05:54 AM
I believe the bugs were identified as:
CSCdx44155 and CSCdv42665
We were seeing this "hang" with any version prior to 3.5.4. In our case, there was no issue with Telnet.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide