cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
372
Views
0
Helpful
5
Replies

WEP to WPA

aksher
Beginner
Beginner

How to we go about migrating from WEP to WPA on AP?

5 Replies 5

John Blakley
Advisor
Advisor

If you want to use just one vlan, then you would need to set under your SSID:

authentication open

authentication key-management wpa

wpa ascii key

Under your radio interface:

int do0

encryption vlan 1 mode ciphers tkip

HTH,

John

HTH, John *** Please rate all useful posts ***

i ve one vlan defined for wireless.

i think we need to change profile settings on the user end.shouldn't we?

Yes. When the clients "switch over", they're going to lose association with the AP. You'll have to change the encryption type under the client from wep to wpa-psk (if windows).

HTH,

John

HTH, John *** Please rate all useful posts ***

how do we accomplish this through SMS. through scripts?

You may be able to do that, or through GPO, but I'm not a big Microsoft guy. You'll probably want to contact them to see if there's a way to do this through scripting of some kind. Otherwise, you'll need to send a message out to all of your users describing how to switch over to the new security method.

HTH,

John

HTH, John *** Please rate all useful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers