Is there an attachment for a GPS module for the ASR-1006 that will allow me to use it as a stratum 1 clock? I've found some info on the ASK9K, but nothing for the 1006. Any help or links would be appreciated!
There is not enough "market" for Cisco to R&D a stratum 1 module.
It is better to get a GPS-based stratum 1 appliance elsewhere. Otherwise, one can use a pair of Linux servers to act as a stratum 2 appliance. Better yet, Linux boxes can be hosted on a Raspberry Pi or Beagle Bone units. Either one can be powered up using the USB ports. We have a few in our DC and they're being powered using the USB ports of the HP servers. Works very well!
XR-vm - CLI's
look for any process crash, review time stamp[if it is too old, then no immediate action needed]
verify if standby state is Ready and NSR-Ready
show proc cpu | exclude " 0%"
It's been a long standing ask for XR to support conditional route advertisements in BGP.
The expected option of using the
option in RPL currently can only be used at the default-inf...
On IOS-XR, Quality of Service has an extension to WRED (Weighted Random Early Detection) called Explicit Congestion Notification (ECN). ECN will mark packets instead of dropping them when the average queue length exceeds a specific threshold value. When c...
Technical Guide to Pre-Defined NAT.
In traditional NAT, due to the government regulations logging the CGN translations is mandatory and this is a huge cost incurrence. In Pre-defined NAT, the translations are known upfront, hence there is no nee...