cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
270
Views
5
Helpful
1
Replies
Highlighted
Beginner

ASR 9000 ospfv2 no prefix

Hi 

I have add a Cisco ASR 9000 router to our current infrastructure, ipv6 routing table is ok with all prefix is exist after ospfv3 neighbourship is established, however ospfv2 neighbour is ok but i see no prefix on the ipv4 routing table 

here is my ospf config

 

router ospf 1
log adjacency changes detail
router-id 10.254.32.226
area 0.0.0.0
authentication message-digest
network broadcast
interface Loopback0
!
interface TenGigE0/0/0/0.226
cost 2
network point-to-point
!
interface TenGigE0/0/0/1.227
cost 4
network point-to-point
!
!
!
router ospfv3 1
router-id 10.254.32.226
log adjacency changes detail
area 0.0.0.0
interface Loopback0
!
interface TenGigE0/0/0/0.226
cost 2
network point-to-point
!
interface TenGigE0/0/0/1.227
cost 4
network point-to-point
!

 

1 REPLY 1
Highlighted
Beginner

this has been fixed but adding network statement from my neighbour router 

This widget could not be displayed.