ASR_903 slot 5/0 not usable

[denhabs10]

Why does the Cisco ASR_903 not support slot 0/5/0, error is below

%ASR900INTF-3-UNSUPPORTED: Interface GigabitEthernet0/5/0 is not supported in subslot 5 by the A900-IMA8T[0/5] module

[luis_cordova]

Hi @denhabs10 ,

You could check this link and the possible combinations:

https://www.cisco.com/c/en/us/td/docs/wireless/asr_900/hardware/installation/b-asr903u-hig/overview.html

Regards

[denhabs10]

Sorry that didn't provide any details, here's a present card deployment which says is supported on the 

A903-RSP1A-55 

15.4(1)S1, RELEASE SOFTWARE

But port 5/0 is unavailable for use it claims

==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
0/0 A900-IMA8T 2.0 14-UEA GEIM I/O FP 0.44 0.44
---- ---------------------- ------ ------------------ ----------- --------------
0/1 A900-IMA8T 2.0 14-UEA GEIM I/O FP 0.44 0.44
---- ---------------------- ------ ------------------ ----------- --------------
0/2 A900-IMA8T 2.0 14-UEA GEIM I/O FP 0.44 0.44
---- ---------------------- ------ ------------------ ----------- --------------
0/3 A900-IMA8S 2.0 14-UEA GEIM I/O FP 0.44 0.44
---- ---------------------- ------ ------------------ ----------- --------------
0/4 A900-IMA8S 2.0 14-UEA GEIM I/O FP 0.44 0.44
---- ---------------------- ------ ------------------ ----------- --------------
0/5 A900-IMA8T 2.0 14-UEA GEIM I/O FP 0.47 0.44
==== ====================== ====== ===

[Carl Lindahl]

What model transceiver are you putting in 0/5/0? What is the PID?

[denhabs10]

I found this in the 3.9 release notes

• When you install a Gigabit Ethernet IM in the topmost interface module slot (slot 5), the last interface (interface GigabitEthernet0/5/0) is not operational; the port is reserved for internal communication.