I am trying to build an EVPN VPWS service between Cisco ASR9K (XR6.4.2. sp 10) and Сisco NCS540 (XR 7.2.2). I have one ASR9K and two NCS540 for the remote site. On the remote site (NCS540) client switch is connected for each PE, and the interface has...
Forum Posts
Resolved! Extend your MPLS Core to CPE
Hi dear community,As a SP, would you extend your MPLS network to CPE ? Why or Why not ?Thanks in advance for your kind comments,Jerems
Hi, I have a BNG that's configured to work without authentication and authorization. The reason we are using the BNG functionality is to be able to apply QoS to single subscribers and to be able to send accounting information. Is it possible for t...
Hi all,What is the state of the art in terms of rate limiting on a Fiber Internet service from a CPE & PE perspective when we perform IPoE (not PPPoE) ?For years we have been configuring egress shaping on the WAN iface of the CPE,Should we consider c...
Hi Cisco Team,We having issue in Cisco SG350-28 Gigabit Managed Switch. Switch was automatically on/off state. Also having power issue. Sometimes switch was not getting ON. So please do the needful for RMA. Regards,Jagatheesan
Resolved! Subinterface Speed Throttling
We have multiple customers that we are supposed to guarantee to have uplink speed of 20Mbps upload/download, and they are all connected to a single 1Gbps ethernet interface on a C7609-E router. Each customer is having a subinterface as their uplink f...
I'm on Cox Cable in Phoenix and I have three Cisco STA1520 tuning adapters. In July of 2020 something happened and my tuning adapters started rebooting several times a day. When this happens it cancels my recordings and interrupts my feed for about...
Hello,A router in LNS configuration with the following configuration :vpdn enable ! vpdn-group TEST accept-dialin protocol l2tp virtual-template 1 source-ip A.B.C.D local name L2TP-1 lcp renegotiation always no l2tp tunnel authentication ip...
Hello,I have a router running L2TP service. I don't use a radius server. The account base is local to the router.aaa new-modelaaa authentication login default localaaa authentication ppp default local!username cisco@test.com password 0 CiScO!vpdn ena...
Hello Cisco Community,I'm looking for some topics to read and learn about to help with the following scenario.Let's say I have 3 transit providers, ATT, Lumen, and HurricaneElectric. I'd like to prefer ATT and Lumen's networks on egress, so I modify ...
HiAs a member of a service provider company, I noticed that in our LNS "normally the terminaison points for PPP and PPPoE sessions" I have some session in "Forwarded" states, this means that client authentication is done in another device.Which I cou...
HiDoes anyone know that on which VIOS i can run ip multicast-routing distributed? i have tried on vios-adventerprisek9-m.SPA.159.3.T but it doesn't support. appreciate any help
Hello, may I upgrade directly from 7.1.2 to 7.5.2 or is there a version in the middle that I have to upgrade to first?
Hello everyone,I just started using cisco cyber vision today. So I did the basic cyber vision setup for the first time and here is my problem:I have assigned the wrong IP address (the one used to access the Center on the Web) and I want to change it....
Hello. I'm in a process to setup BNG on a Cisco ASR 9903. I have EVPN up and running and working. Here is what i want to achive: We base our username on circuit-id, in this case: cisco-access-1-1-1-p31 (p31 is port: GigabitEthernet0/0/31 - cisco-acce...
