Dell Boomi needs a lot of information for the SAP connector shape. There are a lot of fields to be filled for the Connection Setting AND Listener settings. I only have our sap server's system id, instance number, username, password and server locatio...
Forum Posts
We have a ASA1002X that is receiving 600meg of traffic that is unicast and then NAT to multicast out. This is the only traffic on the router. We do not see any drops in any of the port statistics or the NAT statistics however when we do a 10 minute ...
Hello, it is been a few days that I have been trying to create a Security Domain, a local user and a tenant with the Terraform provider, and with all this create a "private" tenant for that user with the help of roles in the security domain. I manage...
Hi all,I have the following issue in the past weeks that it is driving me a little bit crazy. Hope someone of you can help me. To make the explanation simple, I will focus on what is most important. We are running BNG in a ASR9001 with a bundle-ether...
Hello to allcan someone explain to me the difference between the ptp and the network-clock?They are the same thing?I can configure the first on L2 devices while the second on a router.Thanks
Hi,is their a way to reduce the mpls label. I have limitation of 1M labels. I am running the ipv4 labelled unicast.
I have been testing some as-path match scenarios using BGP filtering and I found that on IOS XE, following two Regex matches giving the same results.What I want is to match is, any prefix if it originated from 12031 ( I don't care what path it took t...
I'm trying to setup overlays and my understanding is that in order to do that I need:- "service instance": this selects the traffic coming in from a port/etherchannel- "overlay instance": this can be configured (for instance on a CSR1000v) with the c...
Hello Community members, I've got two ASR1001-X running 16.12.5 with SmartLincensing enabled and the router registered with the CSSM (directly to the Cisco CSSM, not On-Premise SSM). The FLSA1-1X-2.5-20G license is visible in the VirtualAccount (DEFA...
We have basic IPoE service working on our ASR1002-X chassis, but cannot seem to assign a static IP address via RADIUS. Should I be using a different RADIUS attribute than Framed-IP-Address? A sanitized version of my configuration is below. I am try...
I'm using Cisco 4742HDC cable box and i need to connect it with my tv through cable box. Is the article Connecting Soundbar to TV with cable box will solve my issue? Your suggestions will be highly appreciated.Thank youRegards: Zeeshan MehmoodTELCO C...
Hallo all,i have a Viavi T-Bird/MTS-5800-100G Tester, it work with Loopback Device (Viavi NCS-100), The problem when i measure i can see just the Download of my Measurment , did any one have experience with this Network Tester ? i think the Reason is...
Has anyone seen the attached error before while attempting to deploy the Crossworks infrastrucute to vCenter? I don't know Terraform at all so I'm not sure what the issue is.
Hallo ,What can be the Reason, that the Workload or Press on Interface of Core 1 (From MLS 1 Side) in this Network is more, although there is staic Route config with 1 metric to the to core 2 (From MLS ) ,and to the Core 1 the static metric is 5. als...
Hi I am in the middle of setting up a Proof of Concept LNS on a ASR 1002-X running IOS XE 15.2(4)-S5 with the ADVENTERPRISE license. We have a test account going through the process of connecting but it never completes. Can anyone shed any light on ...
