Other Service Provider Subjects

Hi,does anyone know any netflow collector application that it woks fine with SCE?I´m using Netflow Analyzer of SolarWinds and it doesn´t work rigth.I've applied next RDR-formatter configuration on SCE:RDR-formatter destination 10.95.51.99 port 2055 c...

Having configured a blacklist on a SCE1010, testing against URL's of the form http://blacklisted.site works as expected.Testing against https://blacklisted.site is not blocked.Searching through the SCE documentation I cannot find anywhere that it say...

Just a quick query about Cisco CMTS command. Cablelab D3.0 spec defines CM_CTRL_REQ, and relative TLV encodings for mgmt purpose.http://www.cablelabs.com/specifications/CM-SP-MULPIv3_0-I09-090121.pdfsection 6.4.35. And we want to utilize Docsis stand...

Hello, we've recently moved a UBR10012 chassis and seem to have lost the mounting brackets. No one has been able to tell us the proper part that needs to be ordered. Are there any spares available for this part? Thank you.

  When upgrading to 12.2(33)SCC3 code we started seeing customers who have ASA and sonicwall firewalls having arp issues with static IP's sitting behind the firewall on there DMZ's  When looking into this we noticed it is only on our MC20x20 card tha...

Hi all,Our client experiences a problem regarding the SCA BB Console. The console is installed on a Windows 2008 server. The problem comes when a user tries to push the service policy to a SCE. The following error occurs:Failed to apply service confi...

Hi Harold,We were just issued our IPv6 address block by Arin, and it came with three ASNs. Could you provide any information on why there are three (instead of just one)?  Also, would I use one of those ASNs for my EIGRP routing on the inside or are ...

Hi AllWe are using AS5400 as MGW & we are observing following logs on our mGW.IOS version- 12.4 (22)DSpware vesrion=9.4%C5510-1-NO_RING_DESCRIPTORS: No more ring descriptors available on slot 3 dsp 11Can you tell me why this logs coming over MGW, is ...

Dear AllWe are using PGW 2200 in Signalling mode with AS5400 as MGW to terminate call over TDM/PSTN. Can anybody let me know how we can check "why attempted call failed or reason of failed call from MGW level or PGW level.Here one thing i want to kno...

If I have a 5M circuit, how will the SP police?police 5000000 625000OR:police 5000000 156250Because if it was the second option, I wouldn't be really getting full bandwidth right?Thanks,- Mohammad