SCE can classify Layer 3-7 traffic. How does it handle L2 protocol such as LACP? Will it just bypass it?
SCE can classify Layer 3-7 traffic. How does it handle L2 protocol such as LACP? Will it just bypass it?
We are facing an issue while applying service configuration to SCE 8000 device using SCE API supplied by CISCO.We have sample .pqb file which we are using to upload to SCE 8000. We are using 3.5.5 version of firmware on SCE.Attached is exception f...
We have a temporary 3560 in place with a 100MB Internet link and we are starting to oversubscribe the link. I'd like to start shaping the traffic which I'm assuming will help with some of the latency and upload/download issues we see when we get clo...
Hi, Can anyone please share configuration template of BRAS on 7609 router.Thanks in Advance..Regreds,
We are interconnecting with another carrier and the distance is over 80km. Anyone know of a good product to amplify or regenerate the signal?
I'm currently trying to setup an ISG using TAL (transparent autologon). I already tested it using the ISG as a DHCP server and it works good.But now I'm trying to make it work using an external DHCP server configuring dhcp relay on ISG and it is not...
What are my options for redundancy on one ASR, 2 interfaces. I know I have options like HSRP and VRRP but I am looking for something I can do between two interfaces on the same router. Perhaps policy routing is my solution. I have to do some more...
From cli output:13237 3356 3549 22047 195.69.144.212 from 195.69.144.212 (82.197.128.1) Origin IGP, localpref 100, valid, external Community: 3356:2 3356:22 3356:86 3356:501 3356:666 3356:2065 3549:4852 3549:34152 13237:44049 13237:46067...
HelloI am Redouane from algeria (MCP,A+,Network+2009 soon) , as i am studying networking some times i meet some issues ,The question that i want to ask is : in the DSL connection i want to know if the DSLAM device that is found in the telco side to c...
I have installed the 7600-SIP-200 and SPA-4XT-SERIAL modules in the 6513 switch. Both modules have been detected. But, I received following error message:“SLOT 1: 00:00:04: %SPA_OIR-3-UNSUPPORTED: The SPA-4XT-SERIAL in Subslot 0 is not supported by t...
Hello community,I Have a Cisco 7204VXR router with NPE-G1 that started acting weird for 24 hours. This router is dual attached to two 6k5 routers using multimode FO and SX GBICs.The router is used as an LNS termination point for PPPoVPDN sessi...
In case when there is failover between RP on the GSR; tend to lose the ssh /telnet session for few mintues.is this ipv4 virtual address needs to be configured. how does it help? i have configured it but still loses my connection.ipv4 virtual address ...
On this Earth Day, I'm proud to again trumpet Mobility's leadership in the worldwide effort to protect the environment. As documented by the GSMA's recently published "Mobile Green Manifesto", the Mobility industry is working to not only lower its o...
(Reposting this entry due to system errors - orignally posted Oct 2009)Check out this archived video webcast on the Light Reading webinar titled “IP RAN and Evolving Backhaul Architectures”. This was originally available in Oct 2009 but still very r...
Hi,I work for an ISP and am coordinating with another local ISP to multihome a common customer, we got him a 32 ASN but neither of us support 32 bit ASN yet. We have a common upstream provider who does not support it neither. We decided to use AS2345...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-11-2024 07:38 AM | ||
08-23-2024 08:28 AM | ||
07-29-2024 02:06 AM | ||
06-04-2024 01:58 PM | ||
04-18-2024 09:25 AM |