Other Service Provider Subjects

HI all,I am using the setup 2ADSL line terminated the 2800 router, it is working fine.I am facing a problem incoming connection.1)Webmail connection accessing from outside .2) if we shutdown 1 diler interface i can access the webmail.I am attaching t...

I'm confused with the product of Cisco CRS-1 Single-Port OC-768c/STM-256c POS Interface Module.The problem is that what this module uses: OC768 or OC768c. It seems to support OC768c according to its datasheet, but the order information is Cisco CRS-1...

We supporting an ISP, they have a 720x BRAS which is terminating the PPPOE clients. All users connecting via pppoe, the Authentication and accounting forwarded to a Randius server. We suddenly notice the radius database there is a lot of "port error"...

How we can have PPPoE redundancy on two Cisco7604 boxes

Hi all!i have got cisco 7201 with ios c7200-a3jk91s-mz.122-31.SB13.binThis cisco works as pppoe terminator.I need configure it for 2 services:1. LOCAL, this is local traffic on my network w/o any limits2. INTERNET, this is external traffic to inte...

I need to verify if an SFP is inserted into a port and if its SX/mmf or LX/smfCan someone clarify the following int outputs >> Full-duplex, 1000Mb/s, media type is SX Media-type configured as SFP connectorI was told that "" Media-type configured as...

does anyone know why the clocks are being cnadremoved from the ATM interface.the goes down when the clocl is changed andgoes back when it is removed.Appreciate your assistance...Thanks2006-07-17 11:51:28 Local7.Notice 64.222.x.x 42: Jul 17 11:51:28: ...

I'm trying to send a CoA Account-Logon to ISG, but it replies me with NACK.Nov 14 10:27:19.538: RADIUS: COA received from id 3 172.30.1.130:36233, CoA Request, len 61Nov 14 10:27:19.538: COA: 172.30.1.130 request queuedNov 14 10:27:19.538: RADIUS: au...

Im trying to configure the ssg open-garden to allow unauthorized DSL user access the DNS. However, ssg open-garden <name> is not being displayed on the configuration.

I have a test network that I'm setting up and I have a 4507R switch that has a WLC plugged in via a gigabit port. Then I have an access point plugged into the switch. I have setup two WLANs (one public/one private) and for the public one I have confi...

When I begin debug pppoe error this messeges return:7206_MORAH_BRAS#Nov 7 00:35:43.570 CET: PPPoE 12571: Bad Packet Length - dropping packetNov 7 00:35:46.222 CET: PPPoE 12571: Bad Packet Length - dropping packetNov 7 00:35:46.666 CET: PPPoE 12571...

hello,I've been trying to filter ip traffic on cable modem's config file using docsDevIpFilter OID through CBC, but whenever I apply some filter, whether on the Ethernet of CATV interface, modem just won't get online. General idea is to filter traffi...

Has anyone here ever implemented L2TPv3 and Q in Q? Any opinions on MPLS Psuedowires versus L2TPv3? What I am looking for, is information on why L2TPv3 would be preferred over a traditional MPLS psuedowire configuration.

DOH-GSR-PE2#sh int g2/0/1 controllerGigabitEthernet2/0/1 is up, line protocol is upHardware is GigabitEthernet, address is 0019.55e9.f4cd (bia 0019.55e9.f4cd)Description: ***Connected to OLD_4500-Gig4/47***MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec...