Hello everyone, I am new to here and also to VPLS service which we just ordered from XO Comminication. We have 3 sites and try to connect all of them together, so in the beginning we decided to go with a full-mesh network and furthermore we aske...
Hello everyone, I am new to here and also to VPLS service which we just ordered from XO Comminication. We have 3 sites and try to connect all of them together, so in the beginning we decided to go with a full-mesh network and furthermore we aske...
Hi Developers, We are trying to do context service registration. When i click on register button then it open new tab and redirect me to cisco spark login. I do have a cisco spark account for trial. After login into cisco spark it redirect me for H...
Hello, does anyone know what is the critical temperature of CYLON ASIC on ASR920 and what is the router behavior to prevent overheating? Currently the router shows 80 degrees of Celsius and the state is normal, but I have observed also 92 degrees. R...
With Eric BautistaWelcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to get an overview of the Cisco Cable Modem Termination System (CMTS) platforms and the uBR product family.Eric Bautista is a customer suppor...
Hey guys, iam doing this project where iam simulating an operator and an ISP network an MPLS backbone with ospf i did iBGP for the PE routers with a vrf the the ISP iam finding difficulties with configuring ACS , i have to make those POPs redudnant...
I have a problem to configure Cisco Smart License related with installing Route License up to 4m routes in vRR node using Cisco IOS XRv 9000 with VMWare. Is there anyone could share your experience with the same case? And I saw in the documentation i...
Hi, I want ask, how I can delete mdns proccess from Cisco router (Cisco IOS XE Software, Version 03.11.00.S-ASR1000 Software ) SpoilerCisco IOS XE Software, Version 03.11.00.S - Standard Support ReleaseCisco IOS Software, ASR1000 Software (PPC_...
Receiving following syslog message: *May 6 08:01:34.407: %ASR900IM-3-INVALID_COMBINATION: 8x10GE IM is not allowed in bay 3, can be supported only in bay(s) none
Hi Freinds What do i need to learn more other than BFD,APS,OAM to monitor/dectect and restore network connection thanks all
Hi all, I have configured a cisco ASR1K for CGNAT and it only works for UDP traffic, is there any specific config that needs to be made to have TCP work for CGNAT ? Config: CGNAT#show run interface gigabitEthernet 0/1/0.220Building configuratio...
Hi guys. I need to monitor a state of SCTP sessions on HNBGW. I'm using zabbix server as SNMP server for that.I need to add STARENT-MIB.my snmp mibs. I found next guide with this mibs:http://www.cisco.com/c/dam/en/us/td/docs/wireless/asr_5000/19-0/PD...
Hi Team I'm looking if there a bugs or is normal a configuration for route-map and set community in IOS XE 3.018, I configured well, when I did a show run, the set community is not like the config line used, see below: Script used for config: route-m...
Please find Ultra M Troubleshooting Guide attached
Got ASR1002 IOS 03.13.03.S When session counter between 1..65535 all work perfect. When session counter stay more then 65535 command "sh policy-map session uid 65536"( for example ) stop work. Can this done by command or only reload will help me ?
Dear AllWe are trying to do PPPoE on our 7600 with ES+ card, but it doesn't support it. What card do we need for terminating PPPoE sessions? Any advices will be appreciated. Cheers.Jing
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
01-22-2025 06:00 AM | ||
01-17-2025 07:16 AM | ||
10-30-2024 01:01 PM | ||
08-23-2024 08:28 AM | ||
07-29-2024 02:06 AM |