Other Service Provider Subjects

Hi All,I have performed a "monitor np counter RSV_DROP_IPM4_ING_RTE_DFLAG_DROP np4 count 1 location 0/1/CPU0 detail" on an ASR 9K in an attempt to identify some multicast packets that are dropped.The capture shows three sections with hex values, whic...

I have an ASR920 that does not boot because the bootflash seems to be broken. I tried to boot from USB but since the bootflash seems to be checked during the boot sequence I cannot boot nor do I see a possibility to format the bootflash. Does anybody...

by Sanjeev Mervana, Product & Solutions MarketingSecurity has become a service provider imperative. Cyber adversaries are more aggressive than ever in attacking services, devices and customer data. At Cisco, we believe that a modular, open and multi-...

                Hi!Yesterday we are configured SCE-8000 to VAS mirror to exclude torrenttraffic from this mirror as it described athttp://www.cisco.com/c/en/us/td/docs/cable/serv_exch/serv_control/broadband_app/rel41x/vas_sol/vas_sol/03_vas_sol_confi...

I want to apply ASR1004 act as  LNS to support 20K PPP session, the following configuration can support it(I suppose 20K session's traffic is 20G.): Part NumberProduct DescriptionQuantityASR1004Cisco ASR1004 Chassis, Dual P/S1ASR1004-PWR-ACCisco ASR1...

were trying to use SNMP to change the channel OID, When he try to change the channel number through the SaPeControlChNum(1.3.6.1.4.1.1429.2.2.6.5.2.1.1.2.1)It doesn't change any of the PID info or Channel Status (channel # channel name, etc)It only c...

Hi Guys, I have two Cisco ASR's connected together by two resilient links.On each ASR is a switch with vlans on them. Id like to extend these vlans between the ASR'sIE:(Vlans 1,2,3,4 ) Switch > .1qTrunk> ------- ASR1 =========== ASR2 -< .1qTrunk <---...

I  want to provide access to third parties to verify my certifications .   I can access my Cisco. com .Id but i do not know how i will share my CCNA certifcate access for verification to third party .or share my credential report to employer email ad...

Dear sir,This is regarding Redistribution between BGP to OSPF. We have two Branches (Location A & Location B), From Location A We are tying to connect location B by OSPF for google peering ( In Network diagram AS no 800 i have taken as google AS ), f...

Hi ,   I have a D9036 defect, when I reboot the encoder and I put the Cable on the Port RS 232, I see this error ( see file below ):    What’s the meaning?  And Can I fix it? The software on the encoder is not completing loading.  Looks like the OS h...

How do you route the inner vlan to the internet? Say you have 3 vlan on switch and one port on switch that is set to no switch port with an IP address that connects to a Rogers modem, what besides the default route of 0.0.0.0 0.0.0.0 IP address do u ...

I am getting below given log after that link is down. Please helpMay 23 14:11:45.027: %ENTITY_ALARM-6-INFO: ASSERT CRITICAL Gi0/1 Physical Port Link Down Regards,Najib Ullah Burki. 

Hi,I have a customer in Norway, IT Grossisten which is experiencing a lot of issues with their EPC3825. This is a small service provider, and they now have 150+ pieces on stock which they're not able to use. Until now, they have swapped all modems wi...

Dear all,I have 2 key components in my SP environemnt that i wish to upgrade their IOS: Cisco 7206VXR RouterCurrent IOS: c7200p-advipservicesk9-mz.122-33.SRE10.binProtocols Running: BGP/ISIS/MPLS/MPLS-TE/GRE/XCONNECT etc CIsco 3750-x Switch with IP S...