Other Service Provider Subjects

Hi, I have a Wan LINK  (Layer 3), so I want to check if there are retransmissions in this link.Do you know if there is a way that a can do SPAN on a GigabitEthernet Port on SPA-5X1GE-V2 (Cisco 7600 Platform)I tried but i got this error: R(config)#mon...

HI support teamI've received one Cisco ASA 5505 and am unable to connect to the ASDM on either. Ive done all the basics and but something is clearly wrongWith the default settings on the ASA I am able to ping the ASA from the laptop and vice verse ho...

Hi. I am running MSDP peering between IOS 7200 and IOS-XR.I noticed there's one way SA exchange only.When IOS-XR router sends SAs, I can receive it in 7200.But when 7200 sends SA, it does not reflect in IOS-XR.Need help the soones guys...thanks in ad...

Technology is in every part of our lives. Companies are embracing technology as a way to drive their strategic differentiation. Cisco has showcased a number of ways technology changes the way we do things.How are you leveraging technology to give you...

When a vlan is forwarded to its default gatway(SVI) must that chassie have a routing table if it wants to route outside the lan? How does this process work? Lets say a member from vlan 10 wants to communicate to google, its not going to use inter-vla...

Hi all! I am looking for a way to set a value of CoS to a inner VLAN when I use staked VLANs.I try to use policy-map but only can mark CoS in outer VLAN.My config,7206VXR (NPE-G2) 12.4(15)T16class-map match-all test_cos match access-group name marca_...

Hi Guys,I have a router with two adsl connection, one of them is working fine. The another one I cannot see any packet going to the ISP. The interface atm is up, there is no reset, error, etc but the router doesn't try to connect to ISP, I see this w...

Dear Sir.We have DCM D9901 modular type 1RU,  we have alarm in GbE I/O interface card " card not inserted"  as the information in attached files.Thank you very much in advance ,Adnan Algunaidalgunaid@unitecyemen.comUNITECYEMEN Co.www.unitecyemen.com

Hi all,Potentially a 'shoot in the foot' question, but in all honesty; I don't know... How do ISPs rate limit their customers?  I.E. 10Mbps download, 2 Mbps upload?! So, my scenario; I am essentially in control of a network where I will be a Service ...

The customer (operator) is experiencing multicast traffic drops after they have upgraded their cable plant from 4DS to 8DS channels. The issue seems to be cable modem firmware related (please see description below). The customer is offering IPTV serv...

Will the Cisco RF Gateway 1 work with the UBR7246VXR. To increase the DS channels to 48?

Hi  all,I am checking an existing QoS solution and have a doubt regarding the bandwidth statement on the physical interface. We are supposed to deliver a 30M circuit over a 100M bearer and are using shaping for it, here is the simplified relevant con...

Does anybody know how I would go about blocking all traffic?   I only want to allow access to a group of servers and block everything else.    thank you