Other Service Provider Subjects

Hi everybody.I hope everybody is doing great.    A quick question for you guys.Let say we have Ethernet switches connected in a ring .We want to use Ethernet protection ring for loop avoidance and faster convergence.One of the switch will be RPL owne...

On 7609 PE router, lost only TCP session attach to one interface (Te3/3). The router shows this log Aug  4   13:17:31.424: %LDP-5-NBRCHG: LDP Neighbor 200.111.117.251:0 (1) is DOWN   (Session KeepAlive Timer expired)Aug  4   13:19:52.493: %BGP-5-ADJC...

We noticed that URL normalization on SCE2020 3.7.2 doesn't cover specific scenario.When you enter blacklisted URL in a browser that's allready percent encoded - SCE treats it as some sort of "case-sensitive percent encoding".Suppose we want to blackl...

Hi there,we are using several D9854 receivers in our headend.Some with L-band input and some with a ASI input The problem I have, when there is no input ( L-band or ASI) there is still a sync avalibel at the output and the ChangeOver is not switching...

Hello everyone,could you help me with misunderstanding of sce based subscriber spam notification?I'm trying to implement the scheme where subscriber should be notified for the spam activity only once. So I set options like on pictures below, but my t...

i have some problem this status of SCE. i put command that show me status of sceSCE#  show system operation-status System Operation status is WarningDescription: 1. Problem detected in a power supply2. Not enough disk space3. HW failure due to line f...

            With Ron Hanson Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions from Cisco expert Ron Hanson about the RF Gateway 1 (RFGW1) including installation, operation, configura...

Hi everybodyPlease consider the above topology (click it for better viewing)Above we are running OSPF  and mpls in our cloud. R4 and R1 are running eigrp between office1 ( R3), and office2 (R5) respectively.  We want R4 to advertises 1.0.0.0 the rout...

There are multicast groups on Cisco  that I have to join from my laptop but not able to do so.We are using PIM-SM as below.Can you please let me know what more is needed to make it work?Kindly find below the configurations below.interface Ethernet1/3...

Hi everybodyI am trying to understand 802.1q tunneling or Qin Q.   Please consider the following link for my question. I quote from the link the pertinent parts for my question.http://www.cisco.com/en/US/docs/switches/metro/me3400e/software/release/1...

hi  all , i have MLS cisco 7604  , i tried to use QOS to dedicate  cir for specific  subnet ,  but  it  failed , it seems that bandwidth command dont work on that platform !!! my 1st  question eis  can i apply QOS  and use bandwidth command ??? is it...

Hi everybodyI am looking for any good link on Ethernet private line.  Don't see much on wikipedia on this topic.I appreciate your help thanks and have a great day.

hello all,I use CMTS 10012 and IOS version 12.2(33)SCC7.anyone have an experience with these error log message?Jul 12 14:17:11: cr10k_docsis_xform() Err: xform failed C8/0 T=1044 P=0xC0D4F4D4Jul 12 14:17:11: -Traceback= 4066CB74 4066D4CC 4065A874 406...

i have the version on sce 3.8.5, in the version 3.1 exist a command vlan translation decrement value, but i cant find in the version 3.8.5. how i can configure vlan translation on the sce new version. thanksregards