With Ron Hanson Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions from Cisco expert Ron Hanson about the RF Gateway 1 (RFGW1) including installation, operation, configura...
With Ron Hanson Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions from Cisco expert Ron Hanson about the RF Gateway 1 (RFGW1) including installation, operation, configura...
Hi everybodyPlease consider the above topology (click it for better viewing)Above we are running OSPF and mpls in our cloud. R4 and R1 are running eigrp between office1 ( R3), and office2 (R5) respectively. We want R4 to advertises 1.0.0.0 the rout...
There are multicast groups on Cisco that I have to join from my laptop but not able to do so.We are using PIM-SM as below.Can you please let me know what more is needed to make it work?Kindly find below the configurations below.interface Ethernet1/3...
Hi everybodyI am trying to understand 802.1q tunneling or Qin Q. Please consider the following link for my question. I quote from the link the pertinent parts for my question.http://www.cisco.com/en/US/docs/switches/metro/me3400e/software/release/1...
what is the concept behind fast reroute in IS-ISas it is not working for some of my devices in the networkCan someone explain what parameters of is-is have to met in order to make complete working fast re-route topology??
hi all , i have MLS cisco 7604 , i tried to use QOS to dedicate cir for specific subnet , but it failed , it seems that bandwidth command dont work on that platform !!! my 1st question eis can i apply QOS and use bandwidth command ??? is it...
Hi everybodyI am looking for any good link on Ethernet private line. Don't see much on wikipedia on this topic.I appreciate your help thanks and have a great day.
hello all,I use CMTS 10012 and IOS version 12.2(33)SCC7.anyone have an experience with these error log message?Jul 12 14:17:11: cr10k_docsis_xform() Err: xform failed C8/0 T=1044 P=0xC0D4F4D4Jul 12 14:17:11: -Traceback= 4066CB74 4066D4CC 4065A874 406...
i have the version on sce 3.8.5, in the version 3.1 exist a command vlan translation decrement value, but i cant find in the version 3.8.5. how i can configure vlan translation on the sce new version. thanksregards
Hello,I'm trying to poll traffic stats on svi interfaces on the ASR but the SVI statistics seem to show that there is negligible traffic going through yet the main interface shows there is traffic.interface GigabitEthernet0/1 no negotiation auto serv...
Hi allwe are tying to create a GGSN on an mwam runnig c6svc5fmwam-g7is-mz.binbut hitting an error Jun 18 23:05:39.499: %GTP-2-PDPACTIVATIONFAIL: GTP PDP activation/update failed, GSN: 0.0.0.0, TID: 00, Reason: Mandatory info element invalidJun 18 23:...
Hi everybody.I was studying cable isp infrastructure. I am looking for some good book on cable isp or a link. describing the the communication between cmts and cable modem.I appreciate your helpThanks and have a great weekend.
Dear Team,We have made etherchannel between Cisco WS-C2950T-24 L2 & Cisco 7204VXR (NPE400) router for load balancing purpose.But the traffic from L2 switch to router is just being forwarded on single port & other port is idle while router is properly...
hi,I'm preparing to test the Y.1731 in my lab where i have a 7609 sup720/msfc3it's possibile to take some test with only one cisco 7609? maybe with a VRF configurationthanksciaodavide
Hi,I am looking for best practices of doing such a conversion. I am not able to find any such migration on cisco official upgrade guides. Please advise! Best regards!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
01-22-2025 06:00 AM | ||
01-17-2025 07:16 AM | ||
10-30-2024 01:01 PM | ||
08-23-2024 08:28 AM | ||
07-29-2024 02:06 AM |