11-20-2014 06:24 AM - edited 03-01-2019 02:49 PM
Hello,
can anyone explain to me if licence FLSA1-1X-2.5-20G (upgrade to 20G) activates the built-in 10G ports? I configured on CCW an ASR 1001-X
and CCW says this "FLSA1-BIN-2X10GE-P is incompatible with FLSA1-BIN-1X10GE (CE100009)".
Also, what is the max. number of CGNAT session with 1001-X and 20G licence?
01-30-2015 11:04 AM
Hi!
For any 2.5G to 20G upgrade, the 2x10G built-in ports (FLSA1-BIN-2X10GE-P) are already included. This is way CCW is giving you the error.
Cheers!
02-20-2015 01:54 AM
Hi
I also have a question regarding licensing on ASR1001-X
If we buy license: L-FLSA1-1X-2.5-10G, do we automatically get unlocked one 10G port?
Or we must buy additional license: FLSA1-BIN-1X10GE
Thanks in advance
Regards
02-20-2015 04:54 AM
No, only with the 20G licence you will get the 10G port licences.
I checked this a minute ago.
02-20-2015 05:19 AM
Thank you , is there a Cisco documentation that i can relate it ?
02-20-2015 05:25 AM
I am not aware about any docu.
I checked it on CCW.
02-20-2015 07:28 AM
Just like fgotopo posted
ASR1001-X bulit-in 10GE ports are turned on using port-based licenses. However, if the ASR1001-X is upgraded to 20G, then the two built-in ports are automatically included. Please see Table 37 for the Product Numbers of the port and throughput licenses.
However it doesn’t say same for 10GIG license
Find that very interesting
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: