cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
761
Views
5
Helpful
1
Replies
mentrej
Beginner

[Cisco FAQ] - Do I load new CODE and LICENSES to the RFGW1?

I would like to know where I can find the latest code

1 ACCEPTED SOLUTION

Accepted Solutions
ronhanso
Beginner

All new code and licenses are loaded to the RFGW1 via a FTP server on the same network as the chassis. A laptop can also be used (if plugged direct) and the interface settings are in the same network as the gateway. The laptop must be running a simple FTP server.

Settings for the FTP server are locatred at the bottom of the page.  Click "show FTP settings".

View solution in original post

1 REPLY 1
ronhanso
Beginner

All new code and licenses are loaded to the RFGW1 via a FTP server on the same network as the chassis. A laptop can also be used (if plugged direct) and the interface settings are in the same network as the gateway. The laptop must be running a simple FTP server.

Settings for the FTP server are locatred at the bottom of the page.  Click "show FTP settings".

View solution in original post

Content for Community-Ad