VPN client can be authenticated with the following methods;
Pre-share keys (User Groups and Usernames)
What will be done if we want to authenticate the client by hardware not the user? (I mean hardware fingureprint/serial number which is not duplicate).
In this case pre-shared keys is not suitable, I also checked second method but certificate can be exported and then imported to other machine and it works fine on the other machine also. If you have any idea?
Crosswork Cloud - Crosswork Traffic Analysis - FAQ
Crosswork Cloud - Crosswork Traffic Analysis is a Cloud-hosted Software as a Service platform that provides Netflow based Traffic Analytics. The Crosswork Traffic Analysis platform Traffic Analysis, Peeri...
Cisco Champion Radio · S8|E9 Innovations to Achieve a Trustworthy Infrastructure
How do you know for certain that a router in your network has not been altered with since you deployed it? Wouldn’t it be great if you can cryptographically challenge your r...
IOS upgrade on asr9xx mandates rommon upgrades sometimes while they can be optional at other times. You may land up in unwanted situation if proper procedure is not followed during upgrades.
This article will include complete details about rommon ...
In some situation NCS560 RP become unresponsive after reload or powercycle.
In many NCS560 deployments are in remote location, deployment might be large and human intervention should be kept at minimum
Engineering team have been working on a str...
In simple terms, 'Route Churn' is defined as the 'rate of change of prefixes'. Different XR versions across 4.x to 7.x have differing behavior & support for the BGP churn handling and some enhancements made from 6.5.3 onwards (listed in appendix) mak...